Cisco 2500 Series User Manual page 43

Chapter 3 Configuring and Managing the IP Camera
Table 3-10
Option
Max. Frame Rate
MPEG-4 Settings 2
Note
Resolution
Video Quality Control
Max. Frame Rate
MJPEG Settings
Note
Resolution
Fixed Video Quality
Max. Frame Rate
OL-19273-02
Video Window Options (continued)
Description
Choose the desired maximum frame rate per second for the primary video
stream from the IP camera.
For the wired IP camera, the default values are 30 for NTSC and 25 for PAL.
For the wireless IP camera, default value is 15.
A higher maximum frame rate provides better video quality but consumes
more bandwidth
These MPEG-4 Settings 2 options appear if you choose the Dual MPEG-4 Streams from the
Streaming Mode drop-down list.
Choose the resolution of the secondary video stream.
Choose an option for video quality for the secondary video stream from the
IP camera:
Constant Bit Rate—Specifies that the video stream is output at or close
•
to the constant bit rate that you choose. The default value is 64 Kbps. A
higher bit rate provides better video quality but consumes more
bandwidth.
• Fixed Quality—Specifies that video is output at a fixed quality, which
ranges from Very High to Very Low. The bit rate may vary to maintain
this quality. The default fixed quality is Normal. A higher fixed quality
provides better video quality but consumes more bandwidth.
Choose the desired maximum frame rate per second for the secondary video
stream from the IP camera.
For the wired IP camera, the default values are 25 for NTSC or 20 for PAL.
For the wireless IP camera, default value is 15.
A higher maximum frame rate provides better video quality but consumes
more bandwidth
These MPJEG Settings 2 options appear if you choose the Single MJPEG Stream or the Dual
Streams (MPEG-4 + MJPEG) from the Streaming Mode drop-down list.
Choose the resolution of the MJPEG video stream.
Specifies that video is output at a fixed quality, which ranges from Very High
to Very Low. The bit rate may vary to maintain this quality. The default fixed
quality is Normal. A higher fixed quality provides better video quality but
consumes more bandwidth.
Choose the desired maximum frame rate per second for the secondary video
stream from the IP camera.
The default value is 5.
A higher maximum frame rate provides better video quality but consumes
more bandwidth
Cisco Video Surveillance 2500 Series IP Camera User Guide
Audio/Video Windows
3-21