Periodic maintenance
2.
Remove the shroud and the right side
cover. (See page 45 for removal proce-
dures.)
3. Remove the dipstick, wipe it off with a
clean rag, and then insert it back into the
filler hole.
1 .
4.
Dipstick
Remove the dipstick and check that the
oil is between the maximum and mini-
mum level marks. If the oil is below the
minimum level mark, add sufficient oil of
the recommended type to raise it to the
maximum level mark.
RX10MTA
R
ffl
1
2
1. Maximum level mark
2. Minimum level mark
RX10R / RX10RTR / RX10MT / RX10LT
1
2
1. Maximum level mark
2. Minimum level mark
Recommended drive chain oil:
SAE 75W or 80W API GL-4 Gear oil
ECS00530
CAUTION:
Make sure that no foreign material enters
the drive chain housing.
5. Install the dipstick, making sure to align
the notch in the dipstick handle with the
projection on the drive chain housing.
61