Yamaha RX10RX Owner's Manual page 33

RX10RTR / RX10MT / RX10MTA
1. Spring preload adjuster
Spring preload setting at the rear shock
absorber (spring preload adjuster posi-
tion):
Minimum (soft):
S
Standard:
M
Maximum (hard):
H
RX10R / RX10LT
1. Spring preload adjusting ring
Spring preload setting (spring seat length
or spring preload adjusting ring position):
Minimum (soft):
RX10R / RX10LT 1
Standard:
RX10R / RX10LT 4
Maximum (hard):
RX10R / RX10LT 7
* The spring seat length changes ap-
proximately 1.5 mm (0.06 in) with each
full turn of the adjusting ring.
Control functions
NOTE:
The rear suspension spring preload can be
further adjusted by changing the position of
the spring seat.
Have a Yamaha dealer make this adjustment
as it requires special tools.
ESU11001
Adjusting the rear suspension damp-
ing force (RX1 0R / RX10RTR / RX10LT)
RX10R / RX10LT
EWS00160
Do not turn the remote adjustment dial
while the snowmobile is moving as this
could cause loss of control, an accident,
and injury.
ECS00290
CAUTION:
Be sure to stop the remote adjustment dial
at a marked position around the dial where
there is a click.
The rebound damping force can be adjusted
by turning the rear suspension damping force
remote adjustment dial.
To increase the rebound damping force, turn
the adjustment dial in direction (a). To de-
crease the rebound damping force, turn the
adjustment dial in direction (b).
1 . Rear suspension damping force remote ad-
justment dial
2. Standard position
27