Canceling A Timer Transmission Job - Sharp AL-2060 Operation Manual

SPECIAL FUNCTIONS
6
Press the [ ] key (
to select the day of the week and
press the [OK] key.
1,2,3,
1,2,3,
SP. FUNC
7
Press the [OK] key.
8
Press the [ ] key (
to select the transmission mode and
press the [OK] key.
1,2,3,
1,2,3,
SP. FUNC

CANCELING A TIMER TRANSMISSION JOB

After a timer transmission job is set up, the job goes on standby until the specified time of transmission. If necessary,
the MEMORY STATUS function can be used to cancel a timer transmission job that is on standby ("CANCELING
(DELETING) A STORED FAX JOB" on page 60).
78
) or [ ] key (
) or [ ] key (
The selections are as
follows:
1:SEND MODE
2:BROADCAST MODE
3:POLLING MODE
4:SERIAL POLL MODE
9
) Enter the fax number of the other
machine using one of the following
methods:
• Press a Rapid key.
• Enter a Speed Dial number with the numeric
keys.
• Enter the fax number with the numeric keys.
10
Press the [START] key (
)
).