How To Use The Built-In Timer - Sharp MD-ZV30 Operation Manual

<P=003>

HOW TO USE THE BUILT-IN TIMER

Before setting the timer, make sure that the clock setting is correct. (Page 6)
The start time and stop time, which are set with this operation, will be kept in memory until the AC power lead is
unplugged or the setting is changed.
DISC-1
1
DISC-2
2
DISC-3
3
CD PLAY
ON/STAND-BY CD
VOLUME
3D SURROUND TUNER
MODE ON/OFF (BAND) TRACK START
1 2 3
CD MD DIGITAL EDIT
TIMER /
DELETE
2
3,4
5
1
2
3
6
1
2
3
1
2
3
7
1
2
3
1
2
3
8
1
2
3
9
1
2
3
1
2
3
To select the timer playback mode
Before timer playback, the following preparations are required.
TUNING
Load a CD or MD
CURSOR
MD
REC
NAME / TIMER /
ENTER
TOC EDIT DELETE DISPLAY
Select a CD to be played.
Preset the radio station.
ENTER
1
Press the TIMER/DELETE button.
2
Turn the jog dial so that the "TIMER SET" display appears.
3
Within 10 seconds, press the ENTER button.
4
Select the timer mode using the jog dial.
5
Press the ENTER button.
The start time setting display will appear.
To select the timer recording mode
Before timer recording, the following preparations are required.
Load a recordable MD
Preset the radio station.
1
Press the TIMER/DELETE button.
2
Turn the jog dial so that the "TIMER SET" display appears.
3
Within 10 seconds, press the ENTER button.
4
Select the timer mode using the jog dial.
5
Press the ENTER button.
The start time setting display will appear.
To set the start time and the stop time
6
Turn the jog dial to set the hour at which to start, and then
press the ENTER button.
7
Turn the jog dial to set the minute at which to start, and then
press the ENTER button.
If not set manually, the ending time will be automatically set
for one hour after the starting time.
8
Turn the jog dial to set the hour at which to stop, and then
press the ENTER button.
9
Turn the jog dial to set the minute at which to stop, and then
press the ENTER button.
E-33
MD-ZV30H TINSZ0217AWZZ