Table of Contents
Advertisement
HOW TO USE THE BUILT-IN TIMER
Before setting the timer, make sure that the clock
setting is correct. (Page 11)
(Main unit operation)
TIMER/
ON/
SLEEP
Timer set indicator
STAND-BY
TUNER
(BAND)
CD
TAPE
(1 2)
VIDEO/
AUX
TUNING/
TIME
(
)
3
4
5
(Main unit operation)
TIMER/
SLEEP
Timer set indicator
ON/
STAND-BY
TUNER
(BAND)
VIDEO/
AUX
TUNING/
TIME
(
)
3
4
5
Timer playback
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CD, TUNER (BAND), TAPE (1
button to select the desired function, and then adjust the
sound volume using the VOLUME buttons.
3
Press the TIMER/SLEEP button repeatedly until a white "
is displayed.
VOLUME
The timer set indicator will flash.
4
Press the TUNING/TIME (
time, then press the MEMORY/SET button.
5
MEMORY/
Press the TUNING/TIME (
SET
start time, then press the MEMORY/SET button.
The unit will enter the stand-by mode automatically, and the
timer set indicator will light up.
6
When the preset time is reached, the timer playback will start.
The volume will increase gradually.
7
If you select CD or TAPE, the unit will enter the stand-by
mode after the playback. If you select TUNER or VIDEO/AUX,
it will enter the stand-by mode one hour after the timer play-
back starts.
Note:
When performing timer playback using an external unit con-
nected to the VIDEO/AUX socket, only the power of the main
unit will be turned off automatically. (The power of the external
unit will not be turned off.)
Timer recording
1
Press the ON/STAND-BY button to turn the power on.
Load a cassette for recording into the TAPE 2 cassette com-
partment.
Load the tape with the side to be recorded facing you.
2
Press the TUNER (BAND) or VIDEO/AUX button to select the
desired function, and then adjust the sound volume using the
VOLUME
VOLUME buttons.
3
Press the TIMER/SLEEP button repeatedly until a red "
displayed.
The timer set indicator will flash.
4
MEMORY/
Press the TUNING/TIME (
time, then press the MEMORY/SET button.
SET
5
Press the TUNING/TIME (
start time, then press the MEMORY/SET button.
The unit will enter the stand-by mode automatically, and the
timer set indicator will light up.
6
When the preset time is reached, the timer recording will start.
The volume will increase gradually.
7
When the recording tape reaches its end, the timer recording
will end, and the unit will enter the stand-by mode.
To cancel timer operation:
Press the ON/STAND-BY button to turn the power on.
To change the programmed contents:
Start again from step 1.
Note:
Once the time is set, the setting will be retained until a new
time is entered.
E-21
V
2) or VIDEO/AUX
X
W
or
) button to set the hour start
X
W
or
) button to set the minute
X
W
or
) button to set the hour start
X
W
or
) button to set the minute
f
"
f
" is
Advertisement
Table of Contents
