Sharp CD-SW250DVD Operation Manual page 88

System connections (continued)
CD-SW250DVD
ENGLISH
Placing the speaker system
H
To enjoy the surround effect, we recommend that you place each speaker as
shown to the below.
Front
speaker
(Left)
Surround
speaker
(Left)
Note:
The speaker grilles are not removable.
Installation of the surround speakers:
If possible, mount the surround speakers on the wall. Install them 60cm - 90
cm (23" - 35") above the height of your ears when you are seated.
Example:
When installed on the wall
To install the surround speakers on the wall
H
SHARP designed the surround speakers so you may hang them on the wall.
Be sure to use the correct type and size of screw, as shown below.
5 mm (3/16")
Min. 22 mm (7/8")
E-13
SW250DVD_11-17_EN+ 13
Sub-
TV
woofer
Front
CD-SW250DVD DVD MINI SYSTEM
AUTO REVERSE speaker
1 MIC 2 MIC LEVEL
MAX MIN
(Right)
Main unit
Surround
speaker
(Right)
Example:
When installed vertically
Wall
60 - 90 cm
(23" - 35")
3.2 mm (1/8")
9 mm (3/8")
1. Make a hole in the wall using a drill.
32mm (1-1/4")
8 - 9 mm (3/8")
2. Drive a wall mount plug into the hole using a hammer, until it is flush
with the wall surface.
3. Drive one screw into the wall for each speaker, as shown in the
illustration.
I Make sure that both the screw and the wall can support a load of 20 kg
(45 lbs.).
I Drive the screws, so the screw head extends about 5 mm (3/16") out
from the wall.
Wall surface
4. Install the surround speakers on the wall by inserting the screw heads
into the slots on the back of the speakers.
Wall
surface
27/4/05, 10:49 AM
Wall mounting screw