Sharp CD-SW250DVD Operation Manual page 114

Using the function control (continued)
CD-SW250DVD
ENGLISH
Picture Mode setting
H
Use the following procedure to change the picture mode to bright, mild,
monochrome and standard.
STEPS:
1) Press the PICTURE button whilst pressing down the SHIFT button on
the remote control.
2) Every time PICTURE button is pressed, picture mode will change as follow:
BRIGHT → MILD → MONOCHROME → STANDARD
E-39
SW250DVD_38-42_EN+ 39
To zoom an image
H
Whilst a disc is playing, press the ZOOM button.
ZOOM indicator
z + 1
I Each press of the ZOOM button cycles through the zoom settings as
→ → → →
follows: +1 +2 +3 +4 +5.
Note that all of the above zoom factors are approximate only.
I Whilst an image is zoomed, you can press the cursor 3, 4, 1 and 2
button to shift the view and display the part you want.
I Whilst an image is zoomed, you can zoom out the image by pressing
RETURN button. The image can zoom out until -5 for VCD/DVD and
zoom out until -15 for JPEG.
Press the 4 button.
Press the
ZOOM button.
Press the 2 button.
I When you press the CLEAR/DISPLAY button, the zoom operation is
cancelled and the image returns to normal size.
Notes:
I An image may become distorted when zoomed.
I Subtitles cannot be zoomed.
27/4/05, 10:58 AM
Press the 1 button.
Press the 3 button.