Listening To A Cassette Tape (Tape 2) - Sharp CD-SW250DVD Operation Manual

Listening to a cassette tape (TAPE 2)

CD-SW250DVD
ENGLISH
1
Press the ON/STAND-BY button to turn the power on.
2
Press the TAPE (1V2) button to select TAPE 2.
3
Open the cassette door by pushing the area marked "7".
E-57
SW250DVD_56-57_EN+ 57
DVD MINI SYSTEM
CD-SW250DVD
X-BASS
(SURROUND)
/DEMO
AUTO REVERSE
1 MIC 2 MIC LEVEL
MIN MAX
4
Load a cassette into the TAPE 2
cassette compartment with side A
facing you.
5
Press the ƒ button to choose
one side or both sides.
©
... To listen to both sides.
ƒ ... For endless repeat play of both sides.
é
... To listen to one side.
6
Press the 0 button to listen to side A, or the 1 button for
side B.
To play both sides (©), start from side A. When playback starts from
side B, side A will not be played.
To stop playback:
Press the H (H) button.
Fast forward/rewind on side A:
To advance the tape, press the 2 4 PRESETW (2 / 4) button. To rewind
it, press the X PRESET 5 3 (5 / 3) button.
Fast forward/rewind on side B:
To advance the tape, press the X PRESET 5 3 (5 / 3) button. To
rewind it, press the 2 4 PRESETW (2 / 4) button.
Caution:
I To remove the cassette, press the H (H) button, and then open the com-
partment.
I Before changing from one tape operation to another, press the H (H) button.
I If a power failure occurs during tape operation, the tape head will remain
engaged with the tape and the cassette door will not open. In this case,
wait until the power is restored.
27/4/05, 11:02 AM