Tape Playback; Listening To A Cassette Tape (Tape 1 Or Tape 2) - Sharp CD-DV999W Operation Manual

Listening to a cassette tape (TAPE 1 or TAPE 2)

Before playback:
I For playback, use normal or low-noise tapes for the best
sound. (Metal or CrO tapes are not recommended.)
2
I Do not use C-120 tapes or poor-quality tapes, as they may
cause malfunctions.
I Before loading a tape into the cassette compartment, tighten
the slack with a pen or a pencil.
*DV999W_EP54-55 54
Tape 1 playback
1
Press the ON/STAND-BY button to turn the power on.
2
Press the TAPE (1 2) button to select TAPE 1.
3
Open the cassette door by
pushing the area marked "7".
4
Load a cassette into the
TAPE 1 cassette compart-
ment with the side to be
played facing toward you.
5
Press the 0 button to start playback.
Auto power on function:
When you press any of the following buttons, the unit turns on.
I TAPE (1 2) button (main unit and remote control): The unit turns on and
the "TAPE" function is activated.
I 0 button on the remote control or main unit: The unit turns on and playback
of the last function starts (DVD/CD, TAPE, TUNER, GAME).
04.3.4, 17:48
CD-DV999W (Z)
TINSZA017AWZZ
CD-DV999W
ENGLISH
Tape play indicator
E-54
4