Table of Contents
Advertisement
CD playback (continued)
CD-DV999W
ENGLISH
Programmed play
H
By specifying discs from 1 to 5, and tracks from 1 to 99, you can choose up to
32 selections for playback in the order you like.
1
Whilst in the stop mode, press the MEMORY/DIMMER
button.
2
Press one of the s 1 - s 5 buttons to select the desired
disc.
3
Press the cursor L or M button to select the desired track
and then press the ENTER button.
You can also select the track number by pressing the 0 - 9 buttons.
E-47
*DV999W_EP45-49
47
4
Repeat steps 2 - 3 for other tracks. Up to 32 tracks can be
programmed.
If you make a mistake, the programmed tracks can be cleared by
pressing the cursor 0 button to go to the track confirmation, then press
the CLEAR/DISPLAY button. Press the cursor 1 button to go to the
track selection to add programmes. In the track confirmation, press
the cursor L or M button to check programmed tracks.
Track selection
Track confirmation
Selected disc
Selected disc
5
Press the 0 button to start playback.
Adding tracks to the programme:
Programme setting has been previously stored.
Follow steps 1 - 3 to add tracks. The new tracks will be stored after the last
track in the original programme.
To clear the programmed selections:
1. Whilst in the stop mode, press the MEMORY/DIMMER button.
2. Press the cursor 0 button to go to the track confirmation.
3. Select the track to be erased, by pressing the cursor L or M button.
4. Press the CLEAR/DISPLAY button.
Notes:
I If there is no disc or there is a DVD disc or MP3 disc, the disc will be
skipped.
I Opening the disc tray automatically cancels the programmed sequence.
I Even if you press the ON/STAND-BY button to enter the stand-by mode,
the programmed selections will not be cleared.
I During programmed play, random play is not possible.
I Once programmed, the contents will be memorised. When the unit is stopped
and then the 0 button is pressed, however, normal CD playback will be
resumed. To play back the programme, press the 0 button after the
MEMORY/DIMMER button.
I To exit the programming procedure halfway through, press the MEMORY/
DIMMER button.
I This function is not available for WMA and MP3 discs.
I Direct search buttons on the remote control also can be used to select the
desired track.
I If the CLEAR/DISPLAY button is pressed for more than 2 seconds whilst in
the track confirmation, all programmed tracks will be cleared.
I Programme mode cannot be entered whilst in repeat mode.
04.3.4, 17:47
CD-DV999W (Z)
TINSZA017AWZZ
1
2
3
4
5
6
7
8
9
10
Advertisement
Table of Contents
