NETGEAR DGN1000 User Manual page 53


To set up service blocking:
1. Select Security > Firewall Rules to display the following screen:
2. Under Outbound Services, click Add.
3. Fill in the settings as follows and click Apply to save your settings.
Service. From this list, select the application or service to be allowed or blocked. The list
already displays many common services, but you are not limited to these choices. Use
the Add Custom Service button in the Services screen described in
on page 54 to add any additional services or applications that do not already appear.
Action. Choose how to handle this type of traffic. You can block or allow always, or you
can block or allow according to the schedule you defined, as described in
Firewall Services
LAN Users. These settings determine which packets are covered by the rule, based on
their source LAN IP address. Select the option that you want:
Any. All IP addresses are covered by this rule.
Address range. If this option is selected, fill in the Start and Finish fields.
Single address. Enter the required address in the Start field.
WAN Users. These settings determine which packets are covered by the rule, based on
their destination WAN IP address. Select the option that you want:
Any. All IP addresses are covered by this rule.
Address range. If this option is selected, fill in the Start and Finish fields.
Single address. Enter the required address in the Start field.
Log. You can select to log the traffic:
Never. No log entries are made for this service.
N150 Wireless ADSL2+ Modem Router DGN1000
on page 57.
Security Settings
53
Configure Services
Schedule