Log In To The N150 Modem Router - NETGEAR DGN1000 User Manual

Log In to the N150 Modem Router

Log in to the wireless modem router to view or change settings or to set up the wireless
modem router.

To log in:
1. Type http://192.168.0.1 in the address field of your browser and press Enter to display
the login window. You can also enter either of these addresses to access the wireless
modem router: http://www.routerlogin.net or http://www.routerlogin.com.
2. When prompted, enter admin for the router user name and password for the router
password, both in lowercase letters.
Note: The router user name and password are probably different from the
user name and password for logging in to your Internet connection.
See Types of Logins
The router menus display where you can do things like change settings or add other
devices to your network. See
available functionality, and
information about adding devices to your network.
If you do not see the login prompt:
1. Check the LEDs on the router front panel to make sure that the modem router is plugged
into an electrical outlet, its power is on, and the Ethernet cable between your computer
and the router is connected to a LAN port.
2. If you connected the Ethernet cable, quickly launched your browser, and typed in the router
URL, your computer might need a minute or two to recognize the LAN connection. Relaunch
your browser and try again.
3. If you are having trouble accessing the router wirelessly, use an Ethernet cable to connect
your computer during setup so that you can log in to the wireless modem router.
N150 Wireless ADSL2+ Modem Router DGN1000
on page 30 for more information.
Router Interface
Wi-Fi Protected Setup (WPS) Method
Router Internet Setup
21
admin
********
on page 23 for a brief description of the
on page 35 for