Spark Plug; Cleaning Fuel Strainer - Makita EG301A Instructions For Use Manual

CLEANING AND ADJUSTING

SPARK PLUG

(a) If the plug is contaminated with carbon,
remove it using a plug cleaner or wire
brush.
(b) Adjust the electrode gap to 0.6 to 0.7
mm (0.024 to 0.028 in.).
Spark plug : BR-6HS (NGK)

CLEANING FUEL STRAINER

Dirt and water in the fuel are removed by
the fuel strainer.
(a) Remove the strainer cup and throw
away water and dirt.
(b) Clean the screen and strainer cup
with gasoline.
(c) Tightly fasten the cup to main body,
making sure to avoid fuel leak.
Gap 0.6 to 0.7 mm
( 0.024 to 0.028 in. )
27