Specifications - Makita BTD144 Instruction Manual

ENGLISH

SPECIFICATIONS

Capacities
-1
No load speed (min
Impacts per minute
Net weight (with battery cartridge)
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Note: Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･
Read instruction manual.
･
Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an
recycling facility.
Intended use
The tool is intended for screw driving in wood, metal and
plastic.
Model
Machine screw
Standard bolt
High tensile bolt
Hammer mode (Hard)
)
Hammer mode (Medium)
Hammer mode (Soft)
Hammer mode (Hard)
Hammer mode (Medium)
Hammer mode (Soft)
Overall length
Rated voltage
equipment and
environmentally compatible
END004-2
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
its
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive
ENE033-1
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
Electrical safety
4. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
2
BTD144
4 mm - 8 mm
5 mm - 14 mm
5 mm - 12 mm
0 - 2,600
0 - 2,000
0 - 1,300
0 - 3,400
0 - 2,800
0 - 1,300
With one-touch bit holder 139 mm
Without one-touch bit holder 140 mm
1.3 kg
D.C.18 V
GEA006-2