Makita BTD144 Instruction Manual
  1. Manuals
  2. Brands
  3. Makita Manuals
  4. Impact Driver
  5. BTD144
  6. Instruction manual

Makita BTD144 Instruction Manual

Cordless impact driver
Hide thumbs Also See for BTD144:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Instruction Manual
INSTRUCTION MANUAL
Cordless Impact Driver
BTD144
009686
WARNING:
For your personal safety, READ and UNDERSTAND before using.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
1

Advertisement

Table of Contents
loading

Related Manuals for Makita BTD144

Summary of Contents for Makita BTD144

  • Page 1 INSTRUCTION MANUAL Cordless Impact Driver BTD144 009686 WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

  • Page 2: Specifications

    ENGLISH SPECIFICATIONS Model BTD144 Machine screw 4 mm - 8 mm Capacities Standard bolt 5 mm - 14 mm High tensile bolt 5 mm - 12 mm Hammer mode (Hard) 0 - 2,600 No load speed (min Hammer mode (Medium)
  • Page 3 Avoid body contact with earthed or grounded 16. If devices are provided for the connection of surfaces such as pipes, radiators, ranges and dust extraction collection facilities, refrigerators. There is an increased risk of ensure these are connected and properly used. electric shock if your body is earthed or grounded.

  • Page 4: Specific Safety Rules

    27. Under abusive conditions, liquid may be If operating time has become excessively ejected from the battery; avoid contact. If shorter, stop operating immediately. It may contact accidentally occurs, flush with water. If result in a risk of overheating, possible burns liquid contacts eyes, additionally seek medical and even an explosion.

  • Page 5: Functional Description

    FUNCTIONAL DESCRIPTION To start the tool, simply pull the switch trigger. Tool speed is increased by increasing pressure on the switch trigger. Release the switch trigger to stop. CAUTION: Lighting up the front lamp Always be sure that the tool is switched off and the •...
  • Page 6 Reversing switch action CAUTION: Always check the direction of rotation before • 1. Reversing operation. switch lever Use the reversing switch only after the tool comes • to a complete stop. Changing the direction of rotation before the tool stops may damage the tool. When not operating the tool, always set the •...
  • Page 7 If the LED indicator flickers and the tool stops even • with a recharged battery cartridge, stop using and NOTE: have the tool repaired by a Makita local service If the bit is not inserted deep enough into the center. •...

  • Page 8: Operation

    After inserting the bit, make sure that it is firmly • secured. If it comes out, do not use it. High tensile bolt Hook (kgf cm) 1. Groove 2. Hook (1224) 3. Screw (M12) (1020) (816) (M10) (612) (408) 009689 (M8) (204) The hook is convenient for temporarily hanging the tool.

  • Page 9: Maintenance

    LED indicator still flickers (LED indicator for even after charging the battery cartridge, stop using empty signal for and have the tool repaired by a Makita local service remaining battery center. The tool stops capacity also flickers.) during operation.
  • Page 12 Makita Corporation 884880-0...

Table of Contents