Functional Description - Makita 5740NB Instruction Manual

FUNCTIONAL
DESCRIPTION
1
1. Screw
1. Clamping screw
2. Bevel scale plate
B
3 2 1
45
1. Base
6
CAUTION:
• Always be sure that the tool is switched off and unplugged before
adjusting or checking function on the tool.
Adjusting depth of cut
CAUTION:
• After adjusting the depth of cut, always tighten the clamping screw
securely.
Loosen the clamping screw on the depth guide and move the base up or
004076
down. At the desired depth of cut, secure the base by tightening the clamping
screw.
For cleaner, safer cuts, set cut depth so that no more than one blade tooth
projects below workpiece. Using proper cut depth helps to reduce potential for
dangerous KICKBACKS which can cause personal injury.
Bevel cutting
004077
Loosen the clamping screw on the bevel scale plate on the front of the base.
Set for the desired angle (0° - 45°) by tilting accordingly, then tighten the
clamping screw securely.
1
2
Sighting
001378
A
For straight cuts, align the A position on the front of the base with your cutting
line. For 45° bevel cuts, align the B position with it.
1
0
1