Indicator Lights - Honeywell Domonial User Manual

Indicator lights

The front cover of the control panel features
LED indicators which show the status of
your security system.
1- LED I
NDICATOR
ON : The Control Panel is supplied by the Mains power
OFF : There is a Mains Power Failure – The Control Panel is supplied by its built – in battery
2- LED I
NDICATOR
ON : The system is totally armed
OFF : The system is disarmed
BLINKING : The system is Part Armed
3- LED I
NDICATOR
BLINKING : It means that one of the windows or doors protected by a magnetic contact is ope-
ned. It blinks until the window or door has been closed
4- LED I "A
NDICATOR
ON : It means that an alarm occurred during the ARMING mode
BLINKING : It means that an alarm occurred during the Part arm mode
The indicator remains ON until the next arming
5- LED I "S
NDICATOR
ON : It indicates a fault on a technical channel or a remote reset is required
BLINKING : It indicates a fault on the system ( Battery fault, Supervision, Tamper, Phone line failure
or Radio Jamming )
The indicator will remain ON or BLINKING until the condition has been cleared.
"A "
C MAINS POWER
"S "
YSTEM ARMED
"O Z "
PEN ONE
"
LARM MEMORY
R "
ERVICE EQUIRED
P
LEASE CALL
5
S D .
ERVICE EPT