Entry Delay - Honeywell Domonial User Manual

Enter the 4 digit master code (user 1)
Select and enter an existing digit user ID (0-9)
Present the new key TAG
A double beep on the keypad will confirm acceptance of the new TAG.
Exit programming mode by pressing
WARNING : The system will automatically exit programming mode after 15 seconds if no
keys have been pressed and the red light will be timed off. If this occurs you must start this
process again from the beginning.
SENDING A PANIC SIGNAL
You can send an instant panic alarm whenever you feel threatened whilst at home:
Press and hold the "SOS" key simultaneously :
The sounder is triggered (as programmed),
The ARC is informed.
The "PANIC" function is operative even when your system is not armed.
You can stop the sounder manually by pressing key
the keypad.
Stopping the sounder does not interrupt the transmission to the ARC.

ENTRY DELAY

The entry delay gives you the time necessary to enter your access code or use your key TAG
on the keypad to disarm your security system.
WRONG CODE PROTECTION
If your enter 5 successive wrong codes, the keypad is blocked for 5 minutes.
key.
+
of the keyfob or by entering code, on
11