Table of Contents
Advertisement
1
Select a device.
Turn the selected device on or off.
3
Program sequences.
Select the next or previous channel.
Select next or previous chapter on some
models of DVD players.
Press "LAST" to recall the last-viewed
5
channel.
Raise or lower the sound level.
7
Press "MUTE" to turn the sound off or on.
Move the cursor in the menu screens.
Press
"SELECT"
highlighted menu option.
Skip backward, rewind, fast forward, skip
9
forward, stop, pause, or play tracks on
the current disc.
View the current channel and program
information (if available).
11
Display the Menu for the selected device.
Exit the selected devices menu, guide or
program without making a menu selection.
Display the program guide for the
13
selected device.
To control TV, VCR, DVD and CD players, Cable and Satellite Receivers, and Amp/Tuner, follow
these steps. Before proceeding, find the codes for the devices you wish to program in
"Manufacture's Codes" on pages 7,8,9 & 10 of this manual and write them down in the section
below or highlight them for your reference.
NOTE: Any device may be set up on any mode key.
1. Turn on the device (for example, DVD player) and, if needed, load media (for example, a DVD).
2. Press a device key (AMP, SAT, TNR, CD, AUX or DVD).
3. Press and hold "SETUP" until the red LED blinks twice, then release.
4. Enter the first five digit code for your device. The LED blinks once as each digit is entered. If the
code is correct, the LED blinks twice.
NOTE: If the LED does not blink twice, repeat steps 2 to 4 and try entering the code again.
5. Aim the remote at the device and press Power. The device should turn off. If it does not, repeat
steps 3-5, trying each code for your brand until you find one that works. If you cannot find a
code that works, see "Searching for Your Code".
6. Repeat steps 1 to 5 for the other devices you want to control. For future reference, write down
each working device code below:
_ _ _ _ _
_ _ _ _ _
_ _ _ _ _
2
14
15
16
17
R
to
choose
the
G
Y
B
B
CD Code:
AUX Code:
DVD Code:
A Quick Look At The Controls
Switch the TV's, VCR's, SAT's or DVD's
input to view TV or video programs.
Directly enter channels (for example, 09
or 31). Press "ENTER" to send channel
number entries on some TV models.
Dedicated A-BUS section, "MUTE", "ALL
OFF", source selection "1", "2", "3" and
"4", volume "UP" and "DOWN".
In the CBL/SAT, VCR, or DVD modes, the
PVR/DVR Keys as follows:
o Press the "RED" button to instantly
replay the last 7 seconds of a program
you are watching (if the feature is
available).
o Press the "GREEN" button to switch
between live TV and video program-
ming (if the feature is available).
o Press the "YELLOW" button to open
the PVR menu.
o Press the "BLUE" button to skip past
commercials or other uninteresting
scenes (if the feature is available).
o In the DVD or CD mode, press the
"BLUE" button to change discs.
o The A-BUS™ Universal Remote also
comes with the Australian Foxtel Digital
codes in it's library which utilizes these
four buttons.
o Also available for easily identifiable
macro buttons.
Programming A Device
_ _ _ _ _
_ _ _ _ _
_ _ _ _ _
Advertisement
Table of Contents
