Design Information; Product Dimensions And Clearances; Optional Accessories - GE ZV950 Installation Instructions Manual

Design Information
PRODUCT DIMENSIONS AND CLEAR-
ANCES
(cont.)
Using Duct Cover Accessories
A Duct Cover Accessory may be required for your hood
installation height. Use this chart to determine installa-
tion height and accessory for your ceiling height.
ZV950SDSS Installation Heights
Duct Cover
Actual
Ceiling * Possible Hood
Height Installation Height
7' ii" 24-1/2"
8' 0" 25-1/2"
8' 1" 25-1/2" to 26-1/2"
8' 2" 25-1/2" to 27-1/2"
8' 3" 25-1/2" to 28-1/2"
8' 4" 25-1/2" to 29-1/2"
8' 5" 25-1/2" to 30"
8' 6" 25-1/2" to 30"
8' 7" 25-1/2" to 30"
8' 8" 25-1/2" to 30"
8' 9" 25-1/2" to 30"
8' 10" 25-1/2" to 30"
8' 11" 25-1/2" to 30"
9' 0" 25-1/2" to 30"
9' 1" 26-1/2" to 30"
9' 2' 26-1/2" to 30"
9' 3' 26-1/2" to 30"
9' 4" 26-1/2" to 30"
9' 5" 26-1/2" to 30"
9' 6" 30" min.
9' 7" 30" min.
9' 8" 30" min.
9' 9" 30" min.
9' 10" 30" min.
9' 11" 30" min.
i0' 0"
30" min.
14'0"
* BQsed on 36" countertop height.
d3
LU
O_
O_
D
Ub
The sedQI plate is Iocoted behind the removQble filters.
OPTIONAL ACCESSORIES
ZXl4SDSS, optionol stoinless steel duct cover is (]vc]ilc]ble
for ceiling heights greater than 10 ft. and up to 14 ft.
Order the optional duct cover at the same time as the
vent hood and have on site before installation. This kit
contains hardware required for instc]llation. This kit con-
tains instc]llation hardwore.
Note: Duct covers must be installed (is shown in this
book. Do not "build-in" the duct cover. If service is
required, the duct cover must be removed to access
hood components.
4