Attendant Transfer - NEC Xen IPK Features & Specifications Manual

Attendant Transfer

FEATURE
DESCRIPTION
SYSTEM
AVAILABILITY
OPERATING
PROCEDURES
SERVICE
CONDITIONS
Features and Specifications Manual
The Attendant Transfer feature permits efficient call transfers in the system
using an Attendant Multiline Terminal equipped with one to four Attendant
Add-On Console(s). Transferred calls can be voice announced, ring
transferred, or camped on (if the station is busy). All unanswered
transferred calls return to the Attendant with distinct audible and visual
indications, after a programmed time interval.
Terminal Type
Any terminal with Display programmed as an Attendant Position.
Required Components
DCR-60-1A Console or DCU-60-1A Console.
To use this feature at the Attendant Position with a CO/PBX call in
progress:
1. Press the DSS key on the Attendant Add-On Console or the Attendant
Position for the desired station.
2. Receive ringback tone or voice announcement.
N
3. Press on the Attendant Add-On Console or on the Attendant
Position. The call is transferred.
4. Hang up.
5. After time-out, if the transferred call is not answered, a recall tone is
received at the Attendant Position; and the LED on the assigned CO/
PBX line key or Call Appearance Key returns to flashing green.
6. Press the CO/PBX line key with the flashing green LED to return to
the call.
Data Assignment
The Attendant Transfer/Camp-On recall time-out is programmable
(default: 60 seconds).
CO Transfer Ring Pattern and Ring Tone can be assigned in System
Programming.
A-15
A15 – 59