NEC Xen IPK Features & Specifications Manual page 178

July 2003
SERVICE
CONDITIONS
168 – C9
Data Assignment
At default, the system-wide cancel of Call Forward - All Calls, Busy/No
Answer, and Do Not Disturb from an Attendant Position is not allowed.
The ability to set and cancel Call Forward - Busy/No Answer is based
on Class of Service assignment.
Access Codes can be assigned in System Programming to set and
cancel Call Forward - Busy only and Call Forward - No Answer only. At
default, no Access Codes are assigned.
Call Forward - Busy and Call Forward - No Answer can be set
independently of each other to two separate stations. Separate Access
Codes are required.
The time allowed for Call Forward - Busy/No Answer is programmable
in System Programming (default: 10 seconds).
General
If a station with Call Forward assigned receives a second call, and Call
Forward is set to a busy station, the second incoming call does
not follow the forwarding assignment unless the forwarding station
goes idle.
All internal and transferred calls to the station follow the Call Forward -
Busy/No Answer setting.
Tie/DID and DIT/ANA line calls follow the Call Forward - Busy/No
Answer settings.
Only one Call Forward - Busy/No Answer forwarding destination can
be set from one station at a time.
A station can be the destination of any number of Call Forward - Busy/
No Answer settings.
Call Forward-Busy/No Answer forwards to another station only once
(cannot chain call).
Secondary Incoming Extensions cannot be set for Call Forward - Busy/
No Answer.
Call Forward - All Calls has higher priority than Call Forward - Busy,
Call Forward - No Answer, or Call Forward - Busy/No Answer.
If Call Forward - Busy/No Answer is set, camped-on calls and DIT/ANA
calls forward after the No Answer Timer expires.
Call Alert Notification has a significant affect on Call-Forward Busy/
No Answer.
Call Forward Split feature allows internal calls and external calls to be
forwarded to different destinations.
NEC Business Solutions Ltd
Call Forward - Busy/No Answer