Installing Maintenance Utilities; Updating The System Applying Service Pack; Making Backup Copies Of System Information - NEC Express5800 140Rd-4 User Manual

Network Monitor
Using Network Monitor helps you investigating and managing network trouble. To use Network Monitor, you need to restart
the system after the installation has completed, so we recommend installing Network Monitor before any network trouble may
occur.
1.
Point to [Settings] from Start menu and click [Control Panel].
The [Control Panel] dialog box appears.
2.
Double-click [Add/Remove Programs].
The [Add/Remove Programs] dialog box appears.
3.
Click [Add/Remove Windows Component].
The [Windows Components Wizard] dialog box appears.
4.
Check the [Management and Monitoring Tools] check box of the component ON and click [Next].
5.
If the setup requests the install disk, insert Windows Server 2003 CD-ROM into CD-ROM drive and click [OK].
6.
Click [Complete] in the [Windows Component Wizard] dialog box.
7.
Click [Close] in the [Add/Remove Application] dialog box.
8.
Close the [Control Panel] dialog box.
To start Network Monitor, point to [Program] → [Administrative Tools] and click [Network Monitor]. For information on how
to operate Network Monitor, refer to the Online Help.

Installing Maintenance Utilities

Various maintenance utilities are contained in your EXPRESSBUILDER CD-ROM. See Chapter 6 for installing the utilities to
your server or management workstations.

Updating the System Applying Service Pack -

IMPORTANT: If you install Windows Server 2003 CD-ROM which contains Service Pack 1 to
your system, you do not have to apply Service Pack 1 again.
Update the system in the following situations:
Processor is expanded (expanded to single processor to multi-processor).
Modified system configuration.
Recovered the system using recovery process.
Log on to the system with the account that has administrative authority (e.g. Administrator) and insert the
EXPRESSBUILDER CD-ROM into the CD-ROM drive of the server.
[Setup Software] in [Master Control Menu] screen appears, so left-click the item. Click [Update Express5800 System] from the
menu and the setup will start. After that, follow the message to continue the setup process.

Making Backup Copies of System Information

The system information includes the current BIOS settings and any specific information for the server.
Save the information after completing the system setup.
Without the backup data, you will not be able to recover the information.
You can save the information by the following process.
1.
Insert the EXPRESSBUILDER CD-ROM into the CD-ROM drive and reboot the system.
5-17