Safety; Instructions For Power Tools - Grizzly G1023SL Instruction Manual

For Your Own Safety Read Instruction
Manual Before Operating This Equipment
The purpose of safety symbols is to attract your attention to possible hazardous conditions. This
manual uses a series of symbols and signal words which are intended to convey the level of
importance of the safety messages. The progression of symbols is described below. Remember
that safety messages by themselves do not eliminate danger and are not a substitute for proper
accident prevention measures.
NOTICE
Safety Instructions For Power Tools
1. KEEP GUARDS IN PLACE and in working
order.
2. REMOVE ADJUSTING
WRENCHES. Form habit of checking to
see that keys and adjusting wrenches are
removed from tool before turning on.
3. KEEP WORK AREA CLEAN. Cluttered
areas and benches invite accidents.
4. DO NOT USE IN DANGEROUS ENVI-
RONMENT. Do not use power tools in
damp or wet locations, or where any flam-
mable or noxious fumes may exist. Keep
work area well lighted.
-2-
SECTION 1: SAFETY
Indicates an imminently hazardous situation which, if not avoided,
WILL result in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided,
COULD result in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided,
MAY result in minor or moderate injury. It may also be used to alert
against unsafe practices.
This symbol is used to alert the user to useful information about
proper operation of the equipment.
KEYS AND
5. KEEP CHILDREN AND VISITORS
AWAY. All children and visitors should
be kept a safe distance from work area.
6. MAKE WORKSHOP CHILD PROOF
with padlocks, master switches, or by
removing starter keys.
7. DO NOT FORCE TOOL. It will do the job
better and safer at the rate for which it
was designed.
8. USE RIGHT TOOL. Do not force tool or
attachment to do a job for which it was
not designed.
G1023SL/G1023SLX Left-Tilting 10'' Table Saw