Assembly - Grizzly G0659 Owner's Manual

Assembly

To assemble the bandsaw:
1. Attach one of the roller brackets with two hex
bolts and lock washers, as shown in figure
9.
hex Bolt
figure 9. roller bracket.
2.
slide one end of the roller into the attached
bracket, slide the other bracket over the other
end of the roller, then attach the bracket to
the table with the remaining hex bolts and
lock washers (figure 10).
roller
figure 10. Mounting roller.
-14-
lock Washer
roller Bracket
Mounting Bracket
3.
slide the counterweight onto the counter-
weight rail and secure in position with the lock
knob (figure 11).
Counterweight
figure 11. Counterweight installation.
4.
twist the knob onto the saw frame release
lever until it is snug (figure 12).
Knob
figure 12. saw frame release lever knob.
g0659 9" x 14" Vertical Metal-Cutting Bandsaw
Counterweight rail
lock Knob
saw Frame
release lever