Table of Contents
Advertisement
Safety Instructions for Metal Cutting
1.
BLADE CONDITION. do not operate with
a dull, cracked or badly worn blade that can
break during operation or decrease the per-
formance of the bandsaw. inspect blades
for cracks and missing teeth before each
use.
2.
BLADE REpLACEMENT. Wear gloves to
protect hands and safety glasses to pro-
tect eyes when replacing the blade. When
installing the new blade, make sure teeth
face forward and down toward the table in
the direction of blade travel.
3.
WORKpIECE hANDLING. your hands can
be drawn into the blade during operation if
the workpiece moves unexpectedly. Always
keep your hands a safe distance away from
the moving blade.
4.
CUTTING fLUID SAfETy. Cutting fluids
are poisonous. Always follow manufactur-
er's cutting-fluid safety instructions. pay
particular attention to contact, contamina-
tion, inhalation, storage and disposal warn-
ings. spilled cutting fluid invites slipping
hazards.
Like all machinery there is potential danger
when operating this machine. Accidents are
frequently caused by lack of familiarity or
failure to pay attention. Use this machine
with respect and caution to lessen the pos-
sibility of operator injury. If normal safety
precautions are overlooked or ignored, seri-
ous personal injury may occur.
-8-
Bandsaws
5.
fIRE hAzARD. pure magnesium burns
easily. Cutting magnesium with a dull blade
can create enough friction to ignite the small
magnesium chips. Avoid cutting magnesium
if possible.
6.
ENTANGLEMENT
keep the blade guard correctly positioned
and wheel doors closed and secured when
bandsaw is in operation. loose clothing,
jewelry, long hair and work gloves can be
drawn into working parts.
7.
MAINTENANCE/SERVICE. All inspections,
adjustments, and maintenance are to be
done with the power OFF and the power
disconnected. Wait for all moving parts to
come to a complete stop.
8. hOT SURfACES. Be aware that contact
with hot surfaces from machine compo-
nents, ejections of hot chips, swarf and
workpiece can cause burns.
9.
EXpERIENCING DIffICULTy. if at any
time you are experiencing difficulties per-
forming the intended operation, stop using
the machine! Contact our technical support
department at (570) 546-9663.
No list of safety guidelines can be complete.
Every shop environment is different. Always
consider safety first, as it applies to your
individual working conditions. Use this and
other machinery with caution and respect.
failure to do so could result in serious per-
sonal injury, damage to equipment, or poor
work results.
g0659 9" x 14" Vertical Metal-Cutting Bandsaw
hAzARDS.
Always
Advertisement
Table of Contents
