Table of Contents
Advertisement
Disabling On/Off
Switch
To disable the switch and prevent accidental
startup, insert the safety pin through the holes in
the ON button, and insert the end of the chain into
the pin as shown in Figure 37.
Safety Pin
Figure 37. Disabling switch.
Blade Selection
Ripping blade features:
•
Best for cutting with the grain of the
workpiece.
•
20-40 teeth.
•
Flat-top ground tooth profile.
•
Large gullets for large chip removal.
Figure 38. Ripping blade.
G0605X/G0606X Extreme Series 12" Table Saw
Safety
Pin
����
���
�����
Crosscut blade features:
•
Best for cutting across the grain of the
workpiece.
•
60-80 teeth.
•
Alternate top bevel tooth profile.
•
Small hook angle and a shallow gullet.
Figure 39. Crosscutting blade.
Combination blade features:
•
Adequate for cutting both with and across the
grain.
•
40-50 teeth.
•
Alternate top bevel and flat, or alternate top
bevel and raker tooth profile.
•
Teeth are arranged in groups of five.
•
Gullets are small and shallow within the
groups of five teeth, similar to a cross-cut
blade; then large and deep between each
group of five, like a ripping blade.
Figure 40. Combination blade.
���������
���
�����
���������
���
�����
���
����
-29-
Advertisement
Table of Contents
