Options; Communication Options; Options In Ups Cabinet - GE 400 User Manual

8

OPTIONS

8.1

COMMUNICATION OPTIONS

SGT5000_OPT_RMS_01
Stop
Alarm
g Mute Test
GE Digital Energy
8.2

OPTIONS IN UPS CABINET

Modifications reserved
OPM_SGS_USM_M40_M50_2US_V010.doc
3-ph SNMP/WEB plug-in adapter
SNMP - Simple Network Management Protocol
The 3-ph SNMP/WEB plug-in adapter is an interface to the Ethernet Network, and
provides UPS information via the standard SNMP Protocol (UPS-MIB (RFC-1628); GE
Single MIB; GE Parallel MIB).
The UPS can therefore be managed by a Network Management System (NMS) or by
our applications (for instance GE Power Diagnostics, GE Data Protection or GE Service
Software), which uses this information to determine the state of the UPS in order to
guarantee safe and orderly shutdown of the server, when needed.
GE Power Diagnostics
GE Power Diagnostics is an anytime, anywhere concept in UPS status monitoring and
alarm notification that has been successfully implemented in numerous of
installations supporting up to multi-hundred UPS.
Based on the leading Intelligent Remote Information System IRIS all GE UPS types as
well as 3rd party UPS are supported.
Accessing the latest site information via Web and being alerted by Email, SMS or Fax,
it enables the user to make timely decisions in case of changing critical conditions.
With comprehensive data collection and analysis IRIS is not only a remote monitoring
& diagnostics (RM&D) system but, the core of the integrated service offering GE Power
Diagnostics.
GE Data Protection
GE Data Protection software can communicate with the UPS over RS-232, USB or
SNMP to receive status information and measurement values of the UPS.
In case of a critical condition (time on battery, remaining battery autonomy time or
low battery) for the load, the software starts a controlled shutdown.
An enhanced alarm management system provides the possibility to start
applications, send messages, and send e-mails for every upcoming or disappearing
alarm.
Remote Signaling Box (RSB)
Equipped with mimic diagram, general alarm, stop operation, alarm reset and lamp.
RPA Kit (Redundant Parallel Architecture)
Up to 6 units parallel possible for redundancy or capacity in RPA
configuration.
eBoost™ Operation Mode
High efficiency operating mode, where the load is supplied directly by utility and
automatically transferred to inverter if the voltage is out of prescribed tolerances.
5 harmonic filter
th
Located inside UPS cabinet.
FCC Filter
Located inside UPS cabinet. Meets FCC Class A, Part 15 Standard for EMI
suppression.
Page 75/79
User Manual SG Series 400 & 500 UL S2