Storage - Grizzly T21888 Instruction Manual

storage

When storing your air compressor, fol-
low these guidelines:
1. push the compressor on/oFF lever
down to the oFF position.
2. disconnect the
power.
3. Unplug the compressor.
4. run the air tool to relieve the air pres-
sure in the hose, then remove the air
hose and the tool.
5. drain water from the tank as instructed
in draining tank on page 14. leave
the valve open until the next usage.
6. store the air compressor in its normal
operating position in a dry and pro-
tected area.
model t21888 (mfg. since 2/10)
compressor from
Water will condense in the air com-
pressor tank when the compressor
is in operation. Water left in the tank
can cause the tank to weaken and
corrode, increasing the risk of tank
rupture.
always disconnect the air hose from
tools whenever not in use or while
servicing! during maintenance, a
tool connected to air may operate
accidentally, causing serious per-
sonal injury!
failure to unplug the air compres-
sor before storage may result in the
compressor running continuously,
causing overheating, damage to the
compressor, and possibly a fire.
21
-
-