Machine Storage - Grizzly T33858 Owner's Manual

Machine Storage

All machinery will develop serious rust problems
and corrosion damage if it is not properly prepared
for storage. Use the steps in this section to ensure
that your machine remains in good condition.
To bring machine out of storage, perform the Test
Run beginning on Page 15.
Eye injury hazard! Always
wear safety glasses when
handling pressurized air
system.
Items Needed
Cleaner/Degreaser ............................ As Needed
Rags .................................................. As Needed
Tarp or Plastic Sheet ......................................... 1
To prepare machine for storage:
1.
DISCONNECT MACHINE FROM POWER!
Releasing air through safety relief valve
can be extremely loud. Protect hearing with
ANSI-approved hearing protection while
performing following step.
Model T33858 (Mfd. Since 03/23)
2. Use safety relief valve to reduce tank pres-
sure to less than 10 PSI.
3. Open drain valve to drain any condensation
from tank.
4.
Disconnect air tool and hose from machine.
5.
Clean machine.
Qty
6. Close drain valve.
7. Cover machine with tarp or plastic sheet that
will keep out dust and resist liquid or mois-
ture. If machine will be stored in/near direct
sunlight, use cover that will block UV rays.
Do not use a flammable
cleanser to clean machine.
Compressor components
often produce sparks that
could ignite once machine
is connected to power and
turned ON.
-25-