Advertisement
ADDITIONAL SAFETY RULES
FOR CHARGER & BATTERY CARTRIDGE
1. Do
not charge Battery Cartridge when temperature is BELOW 10°C (5OOF)
or ABOVE 4OoC (104OF).
2. Do not attempt t o use a step-up transformer, an engine generator or DC power
3.
Do
not allow anything t o cover or clog the charger vents.
4.
Always cover the battery terminals
with
the battery cover when the battery
5.
A battery short can cause a large current flow, overheating, possible burns
receptacle.
cartridge is not used.
and even a breakdown.
(1) Do
not touch the terminals
with
any conductive material.
(2)
Avoid storing battery cartridge in a container
with
other metal objects such
(31 Do
not expose battery cartridge t o water or rain.
ture may reach or exceed 5OoC (122OF).
completely worn out. The battery cartridge can explode in a fire.
as nails, coins, etc.
6. Do
not store the tool and Battery Cartridge
in
locations where the tempera-
7. Do
not incinerate the Battery Cartridge even
if
it is severely damaged or is
ADDITIONAL SAFETY RULES
FOR CORDLESS DRIVER DRILL
1.
Be aware that this tool is always in an operating condition, because it does
2.
Always be sure you have a firm footing.
3.
Hold the tool firmly.
4.
Keep hands away from rotating parts.
5. When drilling into walls, floors or wherever "live"
electrical wires may be
encountered,
DO
NOT TOUCH ANY METAL PARTS OF THE TOOL!
Hold the tool only by the insulated grasping surfaces t o prevent electric shock
if you drill into a "live" wire.
not have t o be plugged into an electrical outlet.
Be sure no one is below when using the tool
in
high locations.
6. Do
not leave the tool running. Operate the tool only when hand-held.
7. Do
not touch the drill bit or the workpiece immediately after operation; they
may be extremely hot and could burn your skin.
SAVE THESE INSTRUCTIONS.
6
Advertisement
