Maintenance - Makita AF631 Instruction Manual

MAINTENANCE
CAUTION:
Always be sure that the air hose is disconnected from the tool before attempting to perform inspection
or maintenance.
Maintenance of nailer
Always check the tool for its overall condition and loose
screws before operation. Tighten as required.
Make sure all safety systems are in working order before
operation. The tool must not operate if only the trigger is
pulled or if only the contact element is pressed against the
wood. It must work only when both actions are performed.
Test for possible faulty operation with nails unloaded and
with the pusher locked at fully pulled position.
When the tool is not to be used for an extended period of
time, lubricate the tool using pneumatic tool oil and store
the tool in a safe place. Avoid exposure to direct sunlight
and/or a humid or hot environment.
r