Makita AF631 Instruction Manual page 17

Maintenance
of
compressor, air set and air hose
After operation, always drain the compressor tank and the
air filter. If moisture is allowed to enter the tool, it may result
in poor performance and possible tool failure.
l-----
7 Drain cock
Check regularly t o see if there is sufficient pneumatic oil
in the oiler of the air set. Failure to maintain sufficient
lubrication will cause O-rings to wear quickly.
Keep the air hose away from heat (over 6OoC, over 14OoF),
away from chemicals (thinner, strong acids or alkalis). Also,
route the hose away from obstacles which it may become
dangerously caught on during operation. Hoses must also
be directed away from sharp edges and areas which may
lead t o damage or abrasion t o the hose.
I
, - A i r filter
Oiler
7
I
Pneumatic oil
/
To maintain product SAFETY and RELIABILITY, maintenance and repairs should be performed by Makita
Authorized or Factory Service Centers, always using Makita replacement parts.