Tool Installation Instructions And Use; Lubrication; Loading Nailer - Makita AF631 Instruction Manual

TOOL INSTALLATION INSTRUCTIONS AND USE
Lubrication
To insure maximum performance, install an air set (oiler,
regulator, air filter) as close as possible to the tool. Adjust
the oiler so that one drop of oil will be provided for every
30 nails.
When an air set is not used, oil the tool with pneumatic
tool oil by placing 2 (two) or 3 (three) drops into the air
fitting. This should be done before and after use. For proper
lubrication, the tool must be fired a couple of times after
pneumatic tool oil is introduced.
Pne wmatic tool oil
7 -
Loading nailer
CAUTION:
Always disconnect the air hose before loading nails into the nailer.
I Select nails suitable for your work.
Insert strip of nails into the magazine. Two strips
of
nails
can be loaded a t a time.
r - - - - - -
Pull the pusher to the rear to engage it to the last nail.
10