AEG S93880KMX1 User Manual

Aeg refrigerator

Advertisement

EN User manual
S93880KMX1

Advertisement

Table of Contents
loading

Summary of Contents for AEG S93880KMX1

  • Page 1 EN User manual S93880KMX1...
  • Page 2: Table Of Contents

    10. ENVIRONMENT CONCERNS ..........22 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler –...
  • Page 3: Safety Information

    ENGLISH SAFETY INFORMATION In the interest of your safety and to en- 1.2 General safety sure the correct use, before installing WARNING! and first using the appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary mis- Keep ventilation openings, in the appli- takes and accidents, it is important to ance enclosure or in the built-in struc-...
  • Page 4: Care And Cleaning

    WARNING! • Do not clean the appliance with metal Any electrical component (power objects. cord, plug, compressor) must be • Regularly examine the drain in the re- replaced by a certified service frigerator for defrosted water. If neces- agent or qualified service per- sary, clean the drain.
  • Page 5: Control Panel

    ENGLISH 1.7 Environment Protection gases: the appliance shall be dis- posed according to the applica- This appliance does not contain ble regulations to obtain from gasses which could damage the your local authorities. Avoid ozone layer, in either its refriger- damaging the cooling unit, espe- ant circuit or insulation materials.
  • Page 6: Temperature Regulation

    2.1 Display A B C ExtraHumidity mode 2.4 Temperature regulation Temperature indicator The set temperature of the fridge may COOLMATIC mode be adjusted by pressing the temperature Water choice indicator button. Set default temperature: +4°C for the Water circuit cleaning fridge.
  • Page 7: Door Open Alarm

    ENGLISH To switch on the function: Press the Mode button until the cor- responding icon appears. Press the Mode button until the cor- responding icon appears. After a few seconds the COOLMAT- IC indicator goes on. After a few seconds The Holiday in- To switch off the function before its au- dicator goes on.
  • Page 8: Daily Use

    Brightness is now about 20% until the Press the Mode button until the cor- dispenser is used. responding icon appears. After a few seconds the Water circuit 2.13 Switch off the lighting cleaning and the Still cold water in- dicator goes on.
  • Page 9: Vegetable Drawer

    ENGLISH 3.3 Vegetable Drawer Some models have a separator inside the drawer that can be placed in differ- The drawer is suitable for storing fruit ent positions to allow for the subdivision and vegetables. best suited to personal needs. All parts inside the drawer can be re- moved for cleaning purposes.
  • Page 10: Helpful Hints And Tips

    10 www.aeg.com 3.6 Positioning the door shelves To permit storage of food packages of various sizes, the door shelves can be placed at different heights. To make these adjustments proceed as follows: Gradually pull the shelf in the direction of the arrows until it comes free, then re- position as required.
  • Page 11: Care And Cleaning

    ENGLISH 4.2 Hints for fresh food temperature regulator is set to +4° C this represents the mean temperature refrigeration in the fridge. It is normal with higher temperature in the top of the fridge. If To obtain the best performance: the temperature regulator is set to a •...
  • Page 12: Defrosting The Refrigerator

    12 www.aeg.com • regularly check the door seals and The replacement gas cylinder is ob- wipe clean to ensure they are clean tained through your local dealer. and free from debris. • rinse and dry thoroughly. 5.4 Cleaning the water...
  • Page 13: What To Do If

    ENGLISH Service Force Centre or through our If the cabinet will be kept on, ask website www.electrolux.com. somebody to check it once in a while to prevent the food inside from spoiling in case of a power failure. 5.7 Cleaning the ventilation grille The ventilation grille can be removed for washing.
  • Page 14 14 www.aeg.com Problem Possible cause Solution The door has been Do not keep the door opened too frequently. open longer than necessa- The food temperature is Let the food temperature too high. decrease to room temper- ature before storage. The room temperature is Decrease the room tem- too high.
  • Page 15 ENGLISH Problem Possible cause Solution Too much carbon di- Dilute with ordinary wa- Refer to "Selecting and oxide in the water. ter. dispensing water". No carbon dioxide. The gas cylinder is empty. Refer to "Replacing gas cylinder" No or very low wa- The gas cylinder is empty.
  • Page 16: Installation

    16 www.aeg.com Problem Possible cause Solution DEMO appears on The appliance is in dem- Keep pressed approxi- the Display. onstration mode (DEMO) mately 10 sec the Mode button since a sound of buzzer is heard and the Display shut off for a short while: appliance start works regularly.
  • Page 17: Electrical Connection

    ENGLISH 7.2 Location To ensure best performance, if the appli- 50 mm ance is positioned below an overhang- ing wall unit, the minimum distance be- tween the top of the cabinet and the wall unit must be at least 40 mm. Ideally, however, the appliance should not be positioned below overhanging wall units.
  • Page 18: Rear Spacers

    18 www.aeg.com 7.5 Rear spacers • Install the spacers provided within the accessory bag as shown in the figure. • Install the spacers on the brackets of the condenser (black grill) at the back of the appliance. 7.6 Connecting the water...
  • Page 19: Installation Of The Clean Air Control Filter

    ENGLISH 7.7 Levelling When placing the appliance ensure that it stands level. If necessary adjust the feet using the adjustment spanner sup- plied. 7.8 Installation of the Clean Air Control filter The Clean Air Control filter is an active carbon filter which absorbs bad odors maintain the best flavour and aroma for all foodstuffs without risk of odor cross contamination.
  • Page 20: Noises

    20 www.aeg.com 7.10 Installation of the gas cylinder • Remove the gas cylinder wrapping and screw on the adapter to the gas cylinder. Tighten by hand only. • Position the gas cylinder with the adapter attached underneath the valve and ensure that the hooks of the lever system supports the protruding parts of the adapter.
  • Page 21 ENGLISH HISSS! BRRR SSSRRR! SSSRRR! HISSS! HISSS! BLUBB! CRACK! CRACK! BLUBB!
  • Page 22: Technical Data

    22 www.aeg.com 9. TECHNICAL DATA Dimension Height 1800 mm Width 595 mm Depth 650 mm Voltage 230 V Frequency 50 Hz The technical information are situated in the rating plate on the internal left side of the appliance and in the energy label.
  • Page 23 ENGLISH...
  • Page 24 www.aeg.com/shop...

Table of Contents