When the output sequence is Off , the bar code data is output to the host as
the scanner decodes it. Default = Off.
Required
No Read
With No Read turned On, the scanner notifies you if a code cannot be read. If
using an EZConfig Tool Scan Data Window (see page 8-2), an "NR" appears
when a code cannot be read. If No Read is turned Off, the "NR" will not appear.
Default = Off.
On
If you want a different notation than "NR," for example, "Error," or "Bad Code,"
you can edit the output message (see
The hex code for the No Read symbol is 9C.
*Off
Data Formatting
On/Not Required
* Off
beginning on page 5-1).
3 - 21