Chapter 8 - Utilities; To Add A Test Code I.d. Prefix To All Symbologies; Show Software Revision; Show Data Format - Honeywell VOYAGER 1200G User Manual

8
Utilities

To Add a Test Code I.D. Prefix to All Symbologies

This selection allows you to turn on transmission of a Code I.D. before the
decoded symbology. (See the Symbology Chart, beginning on page A-1) for
the single character code that identifies each symbology.) This action first
clears all current prefixes, then programs a Code I.D. prefix for all symbologies.
This is a temporary setting that will be removed when the unit is power cycled.
Add Code I.D. Prefix to
All Symbologies (Temporary)

Show Software Revision

Scan the bar code below to output the current software revision, unit serial num-
ber, and other product information for both the scanner and base.
Show Revision

Show Data Format

Scan the bar code below to show current data format settings.
DFMBK3?.
Data Format Settings
8 - 1