Connecting The Terminal To A Wireless Network; Adding Programs Using The Internet - Honeywell Dolphin 6110 User Manual

a. Open ActiveSync and click Explore, or
b. Open Windows Mobile Device Center and click File Management
2. On the workstation, navigate to the workstation folder containing the program file(s). Copy and paste
the file(s) into the Program Files folder on the terminal.
• If you want the program to be part of the Autoinstall that occurs after a factory reset or software
upgrade, paste the program file(s) in both the \\Honeywell\\Autoinstall folder on the
storage card and the \Honeywell\Autoinstall folder on the device.
Note: Contact a Honeywell technical support representative for information on how to perform a factory
reset. See
3. On the terminal from the
located.
4. Tap on the program file to start the installation.
• If you copied the file to the \Honeywell\Autoinstall folder, you can perform a Soft Reset
(Press the Reset button using the stylus) to install the program.

Connecting the Terminal to a Wireless Network

You connect the terminal to a wireless network through the on-board radio (802.11a/b/g/n, Bluetooth).
Each radio has its own configuration utility and requires specific information about the wireless network
to connect. Successful connection depends on your network infrastructure about which you will need
specific information from your network administrator.
WLAN (802.11a/b/g/n)
The Dolphin 6110 has a 2.4 and 5 GHz 802.11a/b/g/n WLAN (Wireless Local Area Network) radio. The
radio is interoperable with other 2.4 and 5 GHz 802.11a/b/g/n, Wi-Fi compliant products including access
points (APs), workstations via PC card adapters, and other wireless portable devices. By default, the
802.11a/b/g/n radio is disabled after each factory reset. The next step is to configure the connection
parameters of the radio to connect to a wireless network.
WLAN Radio
The WLAN radio is configured in the Honeywell WLAN Security Supplicant, which you access by tapping
the program icon in the task tray near the bottom of the touch screen. For complete configuration instruc-
tions, download the Honeywell Secure Wireless (SWC) Client User's Guide from
wellaidc.com. A link to this guide appears on the Dolphin 6110 product page.

Adding Programs Using the Internet

When you have established a network connection, you can access the Internet and download additional
software programs.
Note: When selecting programs, verify that the program and version of the program are designed for Windows
Embedded Handheld and the terminal's processor. You can verify your processor by tapping
> Settings > System > About > Version . Make a note of the information in the Processor field.
1. Open Internet Explorer and navigate to the program's location. You may see a single *.exe or
setup.exe file, or several versions of files for different device types and processors.
2. Select the program version that matches your Dolphin terminal and processor.
Technical Assistance on page
screen, tap File Explorer, navigate to the folder where the program is
13-1. or go to www.honeywellaidc.com.
www.honey-
8 - 13