Change The Working Mode - Philips AC4080 User Manual

3
Press for 2 seconds to switch off the
appliance.
Note
•
After the appliance is switched off by the
, if the plug is still in the
on/off button
power socket, the appliance will resume
work based on the last settings when it is
switched on again.

Change the working mode

Besides operating under air purification
combined with humidification, the appliance can
also work under air purification only mode.
1
After the appliance is switched on, press
once, and the humidification indicator
goes out with the humidity level indicator.
The humidification function is deactivated.
The appliance works under air purification
only mode.
EN
10
2"
2
Press again to activate the humidification
function again.
Note
•
In air purification only mode, the humidification
button does not respond.
•
The appliance cannot work under humidification
only mode.
Set the sensitivity of the air
quality sensor
This appliance allows you to adjust the
sensitivity of the air quality sensor. There are
three sensitivity levels:
• standard (default setting)
sensitive
•
extra sensitive
•
You can adjust the sensitivity of the air quality
sensor in the following way:
Note
•
When the appliance is set to a higher sensitivity,
the purifier becomes more allergic to the
pollutants in the air. When the purifier is in
AUTO mode, it is more likely to choose a higher
fan speed than the standard mode. The air
quality sensor selects the appropriate color of
the air quality light in accordance with the higher
sensitivity.
1
Unplug the appliance.