Casio DT-970M50E User Manual page 18

USB Client Port
USB Host Port
Power Switch
Selector Switch
LAN Connection
Status LED
LAN
Communication
Status LED
LAN Port
AC Adaptor Jack
Terminal Detect
Switch
Power Contacts
Data
Communication
Terminal
Power Indicator
LED
Mount Hooks
E-16
This port is used to transmit data and fi les (download, upload) by
connecting the cradle to a PC using a USB cable (DT-380USB-A).
The dedicated driver must be installed in the PC before connecting
the cradle to the PC.
This port is used to connect a corresponding USB peripheral device.
Turns the power on and off.
This switch is used to switch between a USB connection and a LAN
connection.
This LED shows the status of the LAN connection.
Off: LAN cable not connected correctly.
Lit green: LAN cable connected correctly.
This LED shows the LAN operation status.
Off: No communication.
Blinking green: Communication in progress.
This port is used for connecting the cradle to a PC or hub via a
LAN cable so that data and fi les can be transmitted (uploaded or
downloaded).
The special driver software must be installed in the DT-970.
Connect the AC adaptor here.
This switch detects when the DT-970 is seated correctly on the cradle.
Power is supplied to the DT-970 via these contacts.
Used for data communications.
This LED indicates the power status and the mounting status of the
DT-970.
Off: Power off
Green: Power on, DT-970 mounted correctly
Red: Power on, DT-970 not mounted
Use these hooks to lock the DT-970 into the cradle.