Detector Repair; Man0927_V3_1510-005_Rev H - Honeywell Fire Sentry SS4-AUV Installation Manual And Operating Manual

Ultraviolet (uv) digital electro-optical fire detectors stand-alone relay mode or 4-20 ma output option
Table of Contents

Advertisement

Model SS4-AUV/-AUV2 Ultraviolet (UV) Digital Electro-Optical Fire Detector
Installation Guide and Operating Manual

MAN0927_V3_1510-005_Rev H_06-13

CAUTION: Model SS4 Detector modules and their components are susceptible
3.4

Detector Repair

Return the defective module to the factory for repair service.
T
HERE ARE
If the Model SS4-AUV/-AUV2 Module must be shipped back to the factory for repair, it MUST be packed in
static protective material. If not available, the Module should be carefully wrapped with aluminum foil. An
RMA (Return Material Authorization) is required for all returns to the factory.
Customer Service at 714-694-2700 or your Distributor for an RMA number before shipping a unit back to
the factory.
WARNING: Hazardous voltages may be present during
testing procedures. Serious injury or death may result
due to failure to observe safety precautions.
to permanent damage due to electrostatic discharge (ESD).
Do
handle a module without adequate grounding precautions.
NOT
NO
USER SERVICEABLE PARTS IN A
D
.
ETECTOR MODULE
Contact Fire Sentry
13

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fire sentry ss4-auv2Ss4-auvSs4-auv2

Table of Contents