S4-34760_Venturi-Air Duct Kit
3
Opening the enclosure
Open enclosure on the detectors side:
1. Lift plastic tab
at the top carefully upwards with
a small bladed srewdriver.
2. Unfix transparent cover
clockwise and remove it.
Fig. 19: Open enclosure (Detector side)
3.1
Detector base wiring
Fig. 21: Cable for loop wiring
The terminal assignment as well as the connection to the Fire alarm panel is detailed in the section 8
"Wiring".
12
www.acornfiresecurity.com
by turning it anti
Vigilon loop
www.acornfiresecurity.com
Open enclosure on the terminals side:
1. Lift plastic tab
at the top carefully upwards with
a small bladed srewdriver.
2. Unfix transparent cover
Fig. 20: Open enclosure (terminal side )
4188-971_issue 1_07/09_duct sensor kit
and remove it .