Table of Contents
Advertisement
38
SymVeo IP Camera
User Manual
Date and time settings
SymVeo provides two different ways to control the time: NTP
and manual.The NTP selection provides the configuration for a
network time server. It provides four options: Disable, Once per
day, Twice per day and Once per hour. You should make you
choice on how long you want to do the time synchronization
between Symveo and server. You should input server IP address,
and you also can input a backup server IP address. The daylight
saving option is specific to USA, Europe and Australia. The
GMT Offset is to be set according to your time zone. The manual
selection allows you to input the year, month, day, hour, minute,
and second manually on this page. When you click the apply
button SymVeo will set these parameters to the system.
Figure 27. Network time protocol configuration
Advertisement
Table of Contents
