Network Settings - GE SymVeo SV-XP1 User Manual

Figure 20. Configuration webpage

Network Settings

Clicking on the Network Settings link will launch the Network
Settings web page. This page allows changes to the Symveo's IP
address. You can also enable DHCP (Dynamic Host
Configuration Protocol) and assign your unit a hostname. DHCP
is an Internet Protocol for automating the configuration of
devices that use TCP/IP. DHCP can be used to automatically
assign IP addresses.
Note: You can only use the web interface to change the SymVeo's IP
address if the domain already matches that of the network the
camera is connected to. You cannot use this feature to do the
initial change of the IP address on the camera. For more
information on how to change the IP address during installation,
31