Table of Contents
Advertisement
30
SymVeo IP Camera
User Manual
Configuration
Clicking on the Configure link will launch the Configuration
webpage. On this page you can remotely modify the following
settings of the SymVeo:
•
Network settings: including the IP address, subnet mask,
and gateway address.
•
Streaming settings: including: set the unit as a sender,
sender-enable setting, sender port, sender control enable,
sender control port, and sender multicast address.
•
Camera MPEG setting: including set the MPEG quality,
format and resolution.
•
Display option: option to display the camera title.
•
Mail server and recipient settings: includes setting
destinations to receive email from a predefined email
server after the trigger button has been pressed.
•
Date and time settings: including setting the time of the
camera to synchronize with the server.
•
IP filter settings: Including the three modes: Disable,
White list, black list
•
Xposure settings: Including four Xposure presets.
•
Web settings: Including the web server IP address.
•
Web user management: Including adding, deleting, and
editing a web user on this page.
•
Factory Reset: an easy method to restore the factory
defaults.
Advertisement
Table of Contents
