Getting Started - Honeywell AutomationServer User Manual

Getting Started

Press the Power button and it turns on your television
and amplifier/receiver (if installed) that are connected to
the eDeck in that room. When the television screen comes
on, it will display the last channel viewed and the Info
Header across the top of the screen.
The Info Header is your quick information guide to the
show you are currently viewing. It comes up each time
you turn on the system and change channels.
Press the Info button at any time to display the Info
■
Header.
Press the Info button a second time to open a
■
description of the show.
Press the Info button again to close the Info Header.
■
Honeywell HAS with Digital Deck AMM
PN: DD000300-01010003
Watching Television
Getting Started
2
2-3