The Ssh Screen - ZyXEL Communications P-660H-61 User Manual

Note: If you want your device to respond to pings and requests for unauthorized services,
you will also need to configure the firewall accordingly by disabling SPI.
Figure 116 Advanced > Remote Management > ICMP
The following table describes the labels in this screen.
Table 86 Advanced > Remote Management > ICMP
LABEL
ICMP
Respond to Ping on The ZyXEL Device will not respond to any incoming Ping requests when Disable is
Apply
Cancel

18.8 The SSH Screen

You can use Secure SHell (SSH) to securely access the ZyXEL Device's command line interface.
Specify which interfaces allow SSH access and from which IP address the access can come. SSH is
a secure communication protocol that combines authentication and data encryption to provide
secure encrypted communication between two hosts over an unsecured network.
Click Advanced > Remote MGMT > SSH tab to display the screen as shown.
Figure 117 Advanced > Remote MGMT > SSH
ADSL Router Series User's Guide
DESCRIPTION
Internet Control Message Protocol is a message control and error-reporting protocol
between a host server and a gateway to the Internet. ICMP uses Internet Protocol (IP)
datagrams, but the messages are processed by the TCP/IP software and directly
apparent to the application user.
selected. Select LAN to reply to incoming LAN Ping requests. Select WAN to reply to
incoming WAN Ping requests. Otherwise select LAN & WAN to reply to both incoming
LAN and WAN Ping requests.
Click this to save your changes.
Click this to restore your previously saved settings.
Chapter 18 Remote Management
227