The Dhcp Setup Screen - ZyXEL Communications P-660H-61 User Manual
P-660hn-t series, p-660n-t series, p-660hnu-t series, p-660hu-t series adsl router series
Hide thumbs
Also See for P-660H-61:
- User manual (354 pages) ,
- Specifications (2 pages) ,
- Declaration of conformity (1 page)
Table of Contents
Advertisement
Chapter 7 LAN Setup
The following table describes the labels in this screen.
Table 22 Network > LAN > IP: Advanced Setup
LABEL
RIP & Multicast Setup
RIP Direction
RIP Version
Multicast
IGMP Snooping
Back
Apply
Cancel
7.3 The DHCP Setup Screen
Use this screen to configure the DNS server information that the ZyXEL Device sends to the DHCP
client devices on the LAN. Click Network > DHCP Setup to open this screen.
Figure 36 Network > LAN > DHCP Setup
112
DESCRIPTION
Select the RIP Direction from None, Both, In Only and Out Only.
This field is not configurable if you select None in the RIP Direction field.
Select the RIP Version from RIP-1, RIP-2B and RIP-2M.
IGMP (Internet Group Multicast Protocol) is a network-layer protocol used to establish
membership in a multicast group. The ZyXEL Device supports IGMP-v1 and IGMP-
v2. Select None to disable it.
Select Enabled to activate IGMP Snooping. This allows the ZyXEL Device to passively
learn memberships in multicast groups.
Click this to return to the previous screen without saving.
Click this to save your changes.
Click this to restore your previously saved settings.
ADSL Router Series User's Guide
- Quick Links:
- Ways to Manage the Zyxel Device
Hide quick links:
Advertisement
Table of Contents
