What You Can Do In The Static Route Screens; The Static Route Screen - ZyXEL Communications P-660H-61 User Manual

Chapter 13 Static Route

13.1.1 What You Can Do in the Static Route Screens

• Use the Static Route screens
on the ZyXEL Device.
• Use the IPv6 Static Route screens
static routes on the ZyXEL Device.

13.2 The Static Route Screen

Use this screen to view the static route rules. Click Advanced > Static Route to open the Static
Route screen.
Figure 92 Advanced > Static Route
The following table describes the labels in this screen.
Table 65 Advanced > Static Route
LABEL
#
Destination
Netmask
Gateway
Modify
194
(Section 13.2 on page
(Section 13.2.2 on page
DESCRIPTION
This is the number of an individual static route.
This parameter specifies the IP network address of the final destination. Routing is always
based on network number.
This parameter specifies the IP network subnet mask of the final destination.
This is the IP address of the gateway. The gateway is a router or switch on the same
network segment as the device's LAN or WAN port. The gateway helps forward packets to
their destinations.
Click the Edit icon to go to the screen where you can set up a static route on the ZyXEL
Device.
Click the Remove icon to remove a static route from the ZyXEL Device. A window displays
asking you to confirm that you want to delete the route.
194) to view and configure IP static routes
196) to view and configure IPv6
ADSL Router Series User's Guide